Step Measuring Guide for PopStep
It's Easy To Figure Out Which Size PopStep covers you need!
Unsure about your RV step brand or size? No problem! Our simple guide will help you quickly determine what you have, so you can confidently order the perfect PopStep Ultimate RV Step Covers size for your MORryde or Lippert steps. Follow our guide below for how to measure for Lippert Solid Step or MORryde StepAbove.
Step 1: Identify Your Step Brand
Before measuring, determine the brand of your RV steps:
MORryde Step Above: Look for a blue oval with the MORryde logo on each side of the top of the steps. These steps will also have black leg extensions and a wide non-skid strip on each tread.
Lippert Solid Steps: Look for a label at the top right of the steps (before you enter your RV). The leg extensions on these steps are typically silver and each tread will have two thin anti-skid strips.
Step 2: Measure Across The Middle Of The Steps
Now that you know your step brand, use the following step to determine the width (which will also help determine the brand):
– Measure the inside of the tread from side to side: Take a measuring tape or ruler and measure the width of your step tread across the front (from one side to the other).
MORryde StepAbove treads will be:
19.5 or 23.5 inches
Lippert Solid Step treads will be:
20 or 24 inches
Step 3: Choose The Correct Pop Step Cover Size
– **Use your measurement**: Refer to the PopStep cover sizing chart below to select the correct cover based on the width you measured across the front of the steps.
MORryde large: 23 1/2 inches
Step 1: Gather Your Measuring Tools
Before starting, make sure you have these tools ready:
✔ Measuring tape (preferably up to 30 inches)
✔ Notepad or phone for recording measurements
✔ Straight edge or ruler (optional for more accuracy)
Step 2: Measure the Width
The width is key because the cover must fit snugly across the step.
- Put the measuring tape at one step edge and stretch it straight across to the other.
- The MORryde large step should measure exactly 23 1/2 inches.
- Write this down as your width measurement.
MORryde small: 19 1/2 inches
Step 1: Gather Your Measuring Tools
To get precise measurements, you’ll need:
✔ Measuring tape (preferably one that extends up to 30 inches)
✔ Notepad or phone to record measurements
✔ Straight edge or ruler (optional for better accuracy)
Step 2: Measure the Width
The width of your step is key when picking a cover.
- Place the measuring tape at one edge of the step and extend it straight across to the opposite side.
- The MORryde small step should measure exactly 19 1/2 inches from edge to edge.
- Write this down as your step width measurement.
Lippert large: 24 inches
Step 1: Gather Your Measuring Tools
To take precise measurements, you’ll need:
✔ Measuring tape (preferably one that extends up to 30 inches)
✔ Notepad or phone to record measurements
✔ Straight edge or ruler (optional for accuracy)
Step 2: Measure the Width
The width is the most important measurement. It ensures the step cover fits securely without slipping or bunching.
- Place the measuring tape at one edge of the step and extend it straight across to the opposite edge.
- The Lippert large step should measure exactly 24 inches wide.
- Write this down as your step width measurement.
Lippert small: 20 inches
Step 1: Gather Your Measuring Tools
To ensure precise measurements, you will require:
✔ Measuring tape extending up to 30 inches
✔ Notepad or phone for recording the data
✔ Straight edge or ruler for enhanced accuracy
Step 2: Measure the Width
The width of your step is critical for a proper fit.
- Position the measuring tape at the step’s edge and extend it straight across to the opposite side.
- The Lippert small step should measure exactly 20 inches wide.
- Record this measurement as your step width.
